Stuck Loading after Flash

Hello,

I have a MacBook Air which had a black screen and fans spinning, so I tried to flash new firmware to the chip. I have attached the firmware I flashed. It worked, and the MacBook Air now shows the apple logo and attempts to load, but even left on over night it will not reach the OS it just sits on the loading bar. It does the same with a Mjave recovery USB. I have tried ALT CMD P R, and removing the wireless card.

Here are the details of the MacBook:

https://ghostlyhaks.com/repository/details/8/123

Here is the full Serial NUmber:

C1MQV6FFG941


Any help would be much appreciated.

Please your model of 

Macbook 
Emc  
number  motherboard 

Hello,

The model is: A1466

The EMC is: 2925

The Motherboard Number is: 820-00165-A

Thank You

please the original file of your macbook

I don't have the original file because it was corrupted.

no problem can you download

maxtiplady wrote: Hello,

The model is: A1466

The EMC is: 2925

The Motherboard Number is: 820-00165-A

Thank You

Done please check and let me nw 

mega.nz/#!ttNjWS6B!ZP18YcyKh-qfXpNStzSjWGJ2AF81rFDwmUYA6Wxne1Q

Same problem here.

Macbook Pro Retina Downloaded from repository and flashed. The mac before was stuck in the bootloop (chime loop) and after flashing started the POST and boot to OS.

I also get the loading bar but stuck at the end. No way to get into mac OS.

Anyone can help me?
I have a dump of the original (corrupted) BIOS.

can you upload the file and if you have original file 
or pute   your
serial number 
emc
number of motherboard 

Original file

https://workupload.com/file/gvQQThyb

EMC is 2678
serial C02LRT4NFH00

Do you need board model?
Where can I get it?

mega.nz/#!Ips0gSIR!_8-CI-zWWBFjQrc6B1wVCCwyLuAap6xKWdhgIblonRI

Thank you.
But with your BIOS the machine does even NOT power UP.
Totally DEAD!

By damaged you mean?
read wrong or what?