What pin goes where ? A1286 MBP

Hi I want remove the EFI code from a MBP A1286. I have the MBA clip and a knock of SOIC clip.
Don't know what pin goes where on my raspberry model B.

I had found an image which i attached. But don't know to what pin goes where on my rip.
At the moment i have this.

Pin:
1 = CS (pin 24 on RPI)
2 = MOSI (21)
3 = 3,3V (pin 17)
4 = GND (pin 25)
5 = 3.3V (pin 17)
6 = 3.3V (pin 17)
7 = MISO (19)
8 = CLK (pin 23)

Is this correct? I am afraid to fry the eprom if thats possible

Which chip do you have? One potential is N25Q064A based on the model provided although there are many for that year.

There are several pin outs for the Raspberry here: ghostlyhaks.com/images/articles/Raspberry-Pi-GPIO-pinouts.png

According to what I can tell, you have the pairs of 5-6, and 7-8, reversed.
According to picture should be 5 = CLK(19) & 6 = MISO(23) then 7 = 3.3v(17) & 8 = 3.3v(17)

+Karma is appreciated if this answers your question

Of course let us know how it goes either way

It starts reading,
so far so good.

Tnx for the info tho change the wires.
It will also be the first time for scan-n-patch for me .
hope that work so I don't have ask you all to change my files .

many tnx.

It works perfectly.
everything is ready again.

Many tnx